Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of《Interior decorative construction work》generally and《Recovery and restoration construction work》for you.
This time, we are roughly explaining hat joint construction work.
It is the latest version article which we also introduced before.
https://kikusou-gr.com/wp/%e3%83%8f%e3%83%83%e3%83%88%e7%9b%ae%e5%9c%b0%e6%96%bd%e5%b7%a5/
As many of you probably wonder what on earth is hat joint?
So, we are briefly explaining it in this article at first.
If you do not need to read that explanation, and would like to see our construction work situation, then please directly visit and see the subtitle of「Hat joint construction work situation」below.
In the first place, What is joint?
Firstly, besides gypsum board which we are explaining this time, joint is pointed to be a gap arising between construction materials such as tile, stone materials and so on.
You may possibly have seen「 cauking 」was done between bricks at that mesh patterned joint between bricks and in the toilet or wet area.
As we above-mentioned, depending on materials, joint is cauked, is thrusted and filled with putty and so on, or joint materials such as joiner is embedded.
The work, Joiner seems to have the nuance of「 tying thing」.
The reason why we treat joint.
The reason why we treat joint varies a lot depending on the places and part materials. The biggest and main reason and role can be probably said「 Cutting the edge, and preventing each material from interfering and wearing. 」
Depending on the temperature and humidity, there is a possibility of materials occurring shrinking, crooking and so on.
Furthermore, because of external factors such as earthquake and so on, materials may also occur to be pushed out or pulled in toward all the direction.
Therefore, by taking joint a little widely or so, chances are that it is often executed constructing work to be able to buffered。
As for other purpose, there is an addition of decorativeness.
The joiner which we are introducing this time is a kind of joint material(changeoff material) 「which can make joint to finish with a certain interval」.
By inserting and sticking joint, there is a merit of preventing it from interfering materials each other, while making materials appear neatly.
There are various kinds of joiners. Comparing with the case of simply embedding calking, it can make a good joint in appearance.
Component materials used at different finishing places each other such as joiners, or component materials to be used at constructing different direction parts crossed such as ceiling and wall part are called 「changeoff material」.
We may be also going to introduce other changeoff materials later.
Hat joint construction work situation
Our introductory remark may have been long so far, however, we are explaining the situations of hat joint construction work site at a certain office warehouse from here.
Because the picture is taken as slightly going down, it may not be very clear, please pay close attention to the worker’s hand.
Rather larger joint than usually was being made in the horizontal direction. We are going to insert 「hat joiner 」in this gap.
As the joint cross section looks like silk hat, it is called hat joiner.
The purpose of inserting joiner this time is「Upper part by painting, and lower part by so- called decorative cross finishing, cutting the edge is recommended.」.
As above-mentioned, in the case of mutual materials, especially in the case that the material and the finishing or so are different, we can say that「cutting the edge」construction work is indispensable.
By cutting the edge, we can reduce what to affect painting or sticking so-called decorative cloth for external factors such as humidity, earthquake and so on.
In this connection, hat joiner is also used for outside wall part joint, besides interior decoration.
(The joiner for outside wall use is different from that of interior decorative use on size and material very much. )
When embedding joiner, we go on sticking at the back side of joiner with glue.
At this time, in order not to leave too much glue, and in order to be able to stick firmly, we carefully go on executing construction work.
If leaving too much thickness, when finishing putty treatment, it is getting hard to flatten it, and it will take time for adjusting it.
Because it is going to be hard to adjust it by work operation as time goes on, the first step is crucial.
The direct above picture is the situation of already finish gluing hat joiner generally.
After this, same as the mutual gypsum boards joint and the screw fixing place, we do putty treatment. After that, when sticking so-called decorative cloth and painting, we adjust not to arise floating or 凹, and we actually transfer the work site to the following painting・sticking so-called decorative cloth construction work process, then our work is finished.
Summary
We so far roughly explained hat joint construction work about the joint construction work itself, and the actual construction work situation as above.
As this time, in the case of different finishing at the upper part and lower part or so, 「cutting the edge 」of joiner and executing construction work of changeoff material happen to be often.
Upon your request, it is certainly possible for us to execute the relative construction work.
Besides, if you happen to have questions・counselling and so on such as「At the place like this, how should I request construction work?」, please be sure to talk with us light heartedly.
It is possible for us to answer for the . whole process, and part of the process construction work too. So, we are waiting for your relative inquiry.
Finally,
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
As construction work cost often differs very much according to work contractors, so we recommend you to compare plural quotation prices.
Comparing our quotation with others, please be sure to consider your order to us.
On 《office・shop or store(tenant)》 renewal work・redecoration work(reform work)・recovery and restoration work, we are glad to receive your construction work request from partly mending and repair work to full set of interior decorative work.
Please give us your inquiry light heartedly in the first place, as we are heartily waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Three colored clicking marks: Instagram, Twitter, Facebook.
Please light heartedly click icons, follow is also nice♡!
~~~~~~~~~~~~~~~~~~~~~IKEBUKURO~~~~~~~~~~~~~~~~~~~~~
★Interior decorative construction work contractor at Ikebukuro★
★Recovery and restoration work・full set of interior decorative work・office relocation★
Kikuchi Souken Co., Ltd.
〒171-0014
Address:
4th floor, Musashiya No.3 building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Phone: 03-5985-4252
~~~~~~~~~~~Interior decorative construction work contractor~~~~~~~~~~~
Hello, everyone! This is Kikuchi Souken Company Limited website.
We are doing construction work in charge of 【Interior decorative finishing work】generally・【Restoration work】 based at Ikebukuro, Toshima ward, Tokyo, in all over Kanto area, for you.
Today, a construction work example which we are explaining is as below.
It is a salon located at Roppongi, Minato ward, Tokyo.
The construction work details which our company took in charge for the customer this time are,【LGS(=light gauge steel) assembling and mounting work】【board finishing work】of wall work at an office building floor.
In the first place, we go on LGS assembling and mounting work.
This time, the area size of height and width of the wall is large.
We prepare suitable board to go on sticking on this LGS by measuring the length or so.
As the work area is rather high, we should use scaffold ladder, shouldn’t we?
After preparing for plaster board, we go on processing for wall use.
Measuring the size of power distribution panel, as for rectangular air exit, we go on cutting roundly by using impact driver.
Then, we go on sticking processed board.
We could go on sticking board neatly.
The operation work of our company is completed by finishing board work.
The kind of work which we executed construction this time were LGS work and board finishing work.
The construction work period is about two days.
As for your request of interior decorative work, please be sure to consult with us by all means.
That is all for our explanation today.
From price quotation to construction finishing work completion, our company is directly managing and doing actual construction work by ourselves, So we are supplying 「more reasonable and low at price, with high quality and good products」 to you.
Please feel free to compare our quotation price with other plural offer prices.
We welcome your comparing our price quotation with others.
「Which construction company should I ask for work? How much is approximate work cost? and so on.」
Office renewal・shop or store redecorating・restoration work・reform work(interior decorative work) and so on.
Please feel free to give us your inquiry in the first place, as we are waiting for your contact to us.
Please also feel free to click ‘’following is nice♡!’’
~~~~~~~~~~~~~~~~~~~~~Ikebukuro~~~~~~~~~~~~~~~~~~~~~
★If you look for interior finishing company, ask for Kikuchi Souken Company Limited.★
★If you also look for office restoration work in Tokyo, ask Kikuchi Souken Company Ltd.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Phone: 03-5985-4252
~~~~~~~~~~~~~~~~INTERIOR FINISHING COMPANY~~~~~~~~~~~~~~~~
Hello! We are Kikuchi Souken Company Limited.
We are doing construction of「Interior finishing work」「Interior restoration work」mainly for you in all over Kanto area.
Recently, there has been a lot of news coming in, however we are taking care of our health in our job.
Today, we did repair work for a convenience store.
If we sum repair work up briefly, it is a restoring work of the room to the originally finished level as much as possible, also including visually.
Therefore, we do the work by using the materials which are the same as the original ones or similar ones.
There is life expectancy for a building, so as aging and external factor or so, it may be deteriorated or shortcomings may occur.
To the building or part of the building, facility, components and the like, we repair or change, then we do restoring work to realize the situation to enable its performances and function of which applicable to be used without hindrance.
That is all for today.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction finishing, our company is directly managing by ourselves, omitting our needles cost in-between. So we are supplying more reasonable and better products to you.
Of course, we do not mind at all if you compare our offer price with others, as we welcome it.
‘’Which construction company should I ask to work? How much is the construction cost? and so on.’’
Besides above also, we are waiting for your questions.
『Office/shop and store/warehouse moving』, interior restoration work, reform work(interior finishing work) and so on.
Please feel free to contact us in the first place.
~~~~~~~~~~~~~~~~~~~~~IKEBUKURO~~~~~~~~~~~~~~~~~~~~~~
★If you look for interior finishing company in Ikebukuro, ask for Kikuchi Souken Co. Ltd.★
★If you also look for office restoration work in Tokyo, ask for Kikuchi Souken Co.Ltd★
Address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Phone: 03-5985*4252
~~~~~~~~~~~~~〜~~INTERIOR FINISHING COMPANY~~~~~~~~~~~~~~~~~