Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative work contractor mainly executing《Interior decorative construction work》generally《Recovery and restoration construction work》for you.
《Variety goods store│new decorative construction work at a commercial facility tenant》
We are explaining this time is, a construction work site at a tenant of commercial facility in Ikebukuro.
The contents of new decorative construction work is, a construction work for variety goods store.
In the event of opening a variety goods store, we will execute design interior decorative work whose level does not spoil the image of selling variety goods. We hear that this variety goods store describes an image of luxurious tropical country.
Then, we are simply explaining flows from construction work request to construction work start.
<Flowing of variety goods store interior decorative construction work >
- ・Considering the image of variety goods store interior decorative image, based on its concept.
- ・Making simple layout chart from its image.
- ・Requesting quotation to interior decorative work contractors.
- ・Asking the possible interior decorative work contractors to make the drawing, with reference to the layout chart.
- ・If you agree on the construction work details・price, then requesting the actual construction work to the contractor.
- ・Starting interior decorative construction work(commencement of work).
- ・Final checking prior to construction work completion.
Above is a simple flowing of variety goods store interior decorative construction work.
Variety goods store│new decorative construction work│content details
Construction work kind: new decorative work (tenant work)
Construction work site: second floor at Tobu Department store, 1-25, 1-chome, Nishi-Ikebukuro, Toshima ward, Tokyo
Construction work content details:
Succeeding the former tenant as the former decorative furnished situation, we strip existing so-called decorative cloth and board. We executed LGS(=light gauge steel) work, board finishing work, hole filling work operation by adjusting ceiling light lighting quantum, doing putty treatment work operation, fitting fixture (frame) work operation, sticking so-caller decorative cloth, and so on.
We briefly treat work where to be able to succeed as it is.
We are explaining work details together with construction work site pictures as follows.
We strip so-called decorative cloth sticked on the existing wall.
As we will use the existing wall, we write down a draft where to open a hole, and open a rectangle hole precisely.
LGS work
LGS work is, a kind of construction work of installing ceiling and floor bedding material, in order to divide space, at the office・shop or store・commercial facility and so on. We use thin steel made material.
As it is different from wooden material, it is durable against water and humidity. Therefore, as it is free from worrying about burning down too, it is often used at the present interior decorative work site.
Its construction work place can be mainly pointed out to be, ceiling and wall framework or structure. This time, it is used to divide space.
Features of LGS are,
- 【It can satisfy fireproof standard, comparing with wood.】
- 【It can shorten construction work period.】
- 【Its construction work unit price is low.】and so on.
There are variousof merits, so it is becoming a mainstream for the present interior decorative construction work.
We use LGS to divide the space.
Board finishing construction work
Board work is, a kind of so-called decorative cloth bedding work at the ceiling and wall.
Specifically, it is an execution work of going on sticking gypsum board(plaster board) on the wall and ceiling.
Gypsum board used for bedding is assumed as a role such as,
- 【Thermal insulation】
- 【Sound isolation】
- 【Fire resisting】
Depending on execution method, there are wide varieties of functions and kinds of (double sticking and the like).
On board, please refer to our following site page article.
[Interior decorative work━board work] On gypsum board, explaining again.
https://kikusou-gr.com/wp/board-work/
Fixture work
Fixture work is, a kind of construction work to fit partition to be able to open and close at the construction open part.
It is mainly used as wall door and window.
As the usage of executing fixture work, there are purposes and usages of entrance, air vent, lighting, sound insulation, crime prevention and so on. Various types of fixtures are installed.
The following construction work picture is under curing after fitting fixture.
We are well protecting not to let materials scatter or not to let tools touch to make dirty or damage during work operation.
Please visit here as reference → curing materials
After fitting fixture to the door.
Under construction work of curing material.
We fill hole vacancy work operation to reduce lightings which the former tenant used.
Because of the store design, some of the existing lightings are used as they are. In order to reduce light quantum, we take off certain lighting equipment, and cut board to match the size of former lighting equipment hole. Then, we fill the board to hammer screw into framework.
After finishing all the place of board work(bedding) process, we do putty treatment at the board gap.-
If we would not carry out putty treatment here, we could not stick so-called decorative cloth (wall paper) neatly.
After embedding the gap, we go on moving to work operation of sticking so-called decorative cloth.
Above these are all of the construction work site pictures this time.
On putty treatment, please refer here.
[Interior decorative construction work Term series] On putty treatment.
https://kikusou-gr.com/wp/board-work/
Summary
This time, we explained a construction work example of variety goods store as above.
By executing construction work with properly using former tenant decorative furnished situation, it is possible to reduce construction work cost markedly too, by succeeding usable places as they are, and by getting rid of where is not used.
If you are considering to request interior decorative work with a property of former partly usable decorative furnished situation, please be sure to talk with us light heartedly by all means.
Finally.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Please do not hesitate to compare our quotation with other plural possible contractors’, as we welcome your comparing competitive quotations.
「Which construction work contractor should I request? How much is approximate construction work cost? and so on.」
《On office・shop or store(tenant) 》renewal work・redecoration work・repair work(reform work)・recovery and restoration work, small scale repair interior decorative work and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Three colored clicking marks: Instagram, Twitter, Facebook.
Kindly click following is nice♡ too light heartedly.
～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro,it is Kikuti Soken Co.Ltd★
★If you also look for recovery and restoration work in Tokyo, it is Kikuchi Souken Co. Ltd★
Phone: 03-5985-4252
～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～
Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of《 Interior decorative construction work 》generally and《 Recovery and restoration construction work 》for you.
We wrote and uploaded 『 Interior decorative construction work Technology series 』newly established starting from last time.
This time, it is our second article.
https://kikusou-gr.com/wp/yougoseris1-202303/
There may be existing this kind of information already in the internet.
However, our company coordinate by ourselves here, and we are introducing our construction work site pictures which can be prepared if any.
We are going to write and upload articles which you can finish reading relative easily.
So, we are glad if you will read them light heartedly.
What is putty treatment? Why it is necessary to do it?
Putty treatment in interior decorative construction work, is said to be a work operation of going on to putty up paste form overlaying or cladding material=putty, and flatten 凹凸, in order to get rid of surface 凹凸, after sticking base material such as gypsum board or so.
There are various sizes of board materials. In the case of gypsum board, the standard size is length × width as 910mm×1820mm.
Edge of this board size is a little angular. Even if sticked tightly, the joint part is becoming rather 凹凸.
(Occurring 凹凸 situation is called「 occurring unflat」.)
Gypsum board image picture.
Quoted from: Yoshino Gypsum Co. Ltd., official product web page.
After sticking gypsum board, prior to putty treatment situation. Showing here that there is凹凸 at the joint part and screw fixing place.
At the first coating material, we go on doing screw fixing (fixing board use screw by electric driver) basically. In order to prevent from occurring 凹凸 here too, we also treat to embed putty from the board material.
But, only with that treatment, we still cannot say that the surface is flat. If we do not go on making all of the sticked boards into a sheet of board, after painting and executing construction work of so-called decorative cloth (wall paper), it may lead to occurring wrinkle or floating. Chances are that it may lead to happen peeling of so-called decorative cloth or crack thereafter.
Therefore, a work process of formulating paste form or powder putty agent, and applying wall, and flattening the surface is becoming indispensable.
Putty treatment construction work method
Puttying is done twice, or three times dividedly.
In the case of twice, they are called ①under putty, ②finish putty(on putty).
In the case of three times, they are called under putty, mid under putty, on putty, or so forth.
By using flat wide stainless spatula called「 putty spatula」, we go on applying putty agent on the board which was prepared for putty board.
At the joint part, we stick a kind of tape called joint tape tightly so as not to be peeled off.
Then, we go on applying under putty on that. (In the case of pasteless type, after applying putty, we go on sticking tape.)
We apply finish putty (on putty) as if covering tape. After drying it, we rub with sand paper, and flatten it, then wipe off occurred powder.
At the outer edge part, we attach corner reinforcing tape or called corner guard, not joint tape, then duly execute construction work in the same manner.
We go on puttying at the screw fixing part too, filing similarly and flattening it. When filing, in order not to hurt the board material, we go on finishing politely and speedily.
In any event, operation work of making sticked first coating materials into as if a sheet of flat board is putty work operation.
As it will affect finished situation of painting and so-called decorative cloth very much, although it is not visible after construction work, we can say that it is a very important work process.
Construction work site example at our company
We are briefly explaining construction work site example at our company as follows.
As it is the work site of introducing『 laminated plastic sheet 』in our terminology series last time too.
We are briefly explaining construction work situation of executing putty at the board material.
Before executing construction work, and on the way
This is just after starting putty construction work operation. Situation before construction work is vivid behind too.
After construction work
This is after construction work of former above picture. Not to occur unevenness, puttying and filing have completed.
Finally
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Please do not hesitate to compare our quotation with other plural possible contractors, as we welcome your comparing competitive quotations.
「How much is approximate construction work price? How to execute construction work of this part？」and so on. We welcome your relative counselling・inquiry to us light heartedly!
On office renewal・shop or store redecoration・recovery and restoration work・reform work(interior decorative work) and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Followings are SNS links which our company is managing.
Three colored clicking marks: Instagram, Twitter, Facebook.
Instagram 
Twitter 
Facebook 
We are waiting for your clicking, follow・nice!
～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～
★Interior decorative construction work contractor at Ikebukuro★
★Recovery and restoration work・full set of interior decorative work・office relocation★
Kikuchi Souken Co., Ltd.
〒171-0014
Address：4th floor, Musashiya No.3 building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Phone: 03-5985-4252
～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～
Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of《Interior decorative construction work》generally and《Recovery and restoration construction work》for you.
This time, we are roughly explaining hat joint construction work.
It is the latest version article which we also introduced before.
https://kikusou-gr.com/wp/%e3%83%8f%e3%83%83%e3%83%88%e7%9b%ae%e5%9c%b0%e6%96%bd%e5%b7%a5/
As many of you probably wonder what on earth is hat joint?
So, we are briefly explaining it in this article at first.
If you do not need to read that explanation, and would like to see our construction work situation, then please directly visit and see the subtitle of「Hat joint construction work situation」below.
In the first place, What is joint?
Firstly, besides gypsum board which we are explaining this time, joint is pointed to be a gap arising between construction materials such as tile, stone materials and so on.
You may possibly have seen「 cauking 」was done between bricks at that mesh patterned joint between bricks and in the toilet or wet area.
As we above-mentioned, depending on materials, joint is cauked, is thrusted and filled with putty and so on, or joint materials such as joiner is embedded.
The work, Joiner seems to have the nuance of「 tying thing」.
The reason why we treat joint.
The reason why we treat joint varies a lot depending on the places and part materials. The biggest and main reason and role can be probably said「 Cutting the edge, and preventing each material from interfering and wearing. 」
Depending on the temperature and humidity, there is a possibility of materials occurring shrinking, crooking and so on.
Furthermore, because of external factors such as earthquake and so on, materials may also occur to be pushed out or pulled in toward all the direction.
Therefore, by taking joint a little widely or so, chances are that it is often executed constructing work to be able to buffered。
As for other purpose, there is an addition of decorativeness.
The joiner which we are introducing this time is a kind of joint material(changeoff material) 「which can make joint to finish with a certain interval」.
By inserting and sticking joint, there is a merit of preventing it from interfering materials each other, while making materials appear neatly.
There are various kinds of joiners. Comparing with the case of simply embedding calking, it can make a good joint in appearance.
Component materials used at different finishing places each other such as joiners, or component materials to be used at constructing different direction parts crossed such as ceiling and wall part are called 「changeoff material」.
We may be also going to introduce other changeoff materials later.
Hat joint construction work situation
Our introductory remark may have been long so far, however, we are explaining the situations of hat joint construction work site at a certain office warehouse from here.
Actually just under executing joiner situation.
In order to execute joiner, the joint is taken out rather largely than vertical direction boards’ joint each other.
Because the picture is taken as slightly going down, it may not be very clear, please pay close attention to the worker’s hand.
Rather larger joint than usually was being made in the horizontal direction. We are going to insert 「hat joiner 」in this gap.
As the joint cross section looks like silk hat, it is called hat joiner.
The purpose of inserting joiner this time is「Upper part by painting, and lower part by so- called decorative cross finishing, cutting the edge is recommended.」.
As above-mentioned, in the case of mutual materials, especially in the case that the material and the finishing or so are different, we can say that「cutting the edge」construction work is indispensable.
By cutting the edge, we can reduce what to affect painting or sticking so-called decorative cloth for external factors such as humidity, earthquake and so on.
In this connection, hat joiner is also used for outside wall part joint, besides interior decoration.
(The joiner for outside wall use is different from that of interior decorative use on size and material very much. )
Hat joiner close-up picture(As we lost the original picture data, the company logo is the former one, sorry!)
When embedding joiner, we go on sticking at the back side of joiner with glue.
At this time, in order not to leave too much glue, and in order to be able to stick firmly, we carefully go on executing construction work.
If leaving too much thickness, when finishing putty treatment, it is getting hard to flatten it, and it will take time for adjusting it.
Because it is going to be hard to adjust it by work operation as time goes on, the first step is crucial.
Finish gluing hat joiner situation.
After this, we do patty treatment again. We go on adjusting the bedding to flatten gypsum board surface.
The direct above picture is the situation of already finish gluing hat joiner generally.
After this, same as the mutual gypsum boards joint and the screw fixing place, we do putty treatment. After that, when sticking so-called decorative cloth and painting, we adjust not to arise floating or 凹, and we actually transfer the work site to the following painting・sticking so-called decorative cloth construction work process, then our work is finished.
Summary
We so far roughly explained hat joint construction work about the joint construction work itself, and the actual construction work situation as above.
As this time, in the case of different finishing at the upper part and lower part or so, 「cutting the edge 」of joiner and executing construction work of changeoff material happen to be often.
Upon your request, it is certainly possible for us to execute the relative construction work.
Besides, if you happen to have questions・counselling and so on such as「At the place like this, how should I request construction work?」, please be sure to talk with us light heartedly.
It is possible for us to answer for the . whole process, and part of the process construction work too. So, we are waiting for your relative inquiry.
Finally,
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
As construction work cost often differs very much according to work contractors, so we recommend you to compare plural quotation prices.
Comparing our quotation with others, please be sure to consider your order to us.
On 《office・shop or store(tenant)》 renewal work・redecoration work(reform work)・recovery and restoration work, we are glad to receive your construction work request from partly mending and repair work to full set of interior decorative work.
Please give us your inquiry light heartedly in the first place, as we are heartily waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Instagram Twitter Facebook
Three colored clicking marks: Instagram, Twitter, Facebook.
Please light heartedly click icons, follow is also nice♡!
～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～
★Interior decorative construction work contractor at Ikebukuro★
★Recovery and restoration work・full set of interior decorative work・office relocation★
Kikuchi Souken Co., Ltd.
〒171-0014
Address：
4th floor, Musashiya No.3 building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Phone: 03-5985-4252
～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～