Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of《 Interior decorative construction work 》generally and《 Recovery and restoration construction work 》for you.
We wrote and uploaded 『 Interior decorative construction work Technology series 』newly established starting from last time.
This time, it is our second article.
https://kikusou-gr.com/wp/yougoseris1-202303/
There may be existing this kind of information already in the internet.
However, our company coordinate by ourselves here, and we are introducing our construction work site pictures which can be prepared if any.
We are going to write and upload articles which you can finish reading relative easily.
So, we are glad if you will read them light heartedly.
What is putty treatment? Why it is necessary to do it?
Putty treatment in interior decorative construction work, is said to be a work operation of going on to putty up paste form overlaying or cladding material=putty, and flatten 凹凸, in order to get rid of surface 凹凸, after sticking base material such as gypsum board or so.
There are various sizes of board materials. In the case of gypsum board, the standard size is length × width as 910mm×1820mm.
Edge of this board size is a little angular. Even if sticked tightly, the joint part is becoming rather 凹凸.
(Occurring 凹凸 situation is called「 occurring unflat」.)
Gypsum board image picture.
Quoted from: Yoshino Gypsum Co. Ltd., official product web page.
After sticking gypsum board, prior to putty treatment situation. Showing here that there is凹凸 at the joint part and screw fixing place.
At the first coating material, we go on doing screw fixing (fixing board use screw by electric driver) basically. In order to prevent from occurring 凹凸 here too, we also treat to embed putty from the board material.
But, only with that treatment, we still cannot say that the surface is flat. If we do not go on making all of the sticked boards into a sheet of board, after painting and executing construction work of so-called decorative cloth (wall paper), it may lead to occurring wrinkle or floating. Chances are that it may lead to happen peeling of so-called decorative cloth or crack thereafter.
Therefore, a work process of formulating paste form or powder putty agent, and applying wall, and flattening the surface is becoming indispensable.
Putty treatment construction work method
Puttying is done twice, or three times dividedly.
In the case of twice, they are called ①under putty, ②finish putty(on putty).
In the case of three times, they are called under putty, mid under putty, on putty, or so forth.
By using flat wide stainless spatula called「 putty spatula」, we go on applying putty agent on the board which was prepared for putty board.
At the joint part, we stick a kind of tape called joint tape tightly so as not to be peeled off.
Then, we go on applying under putty on that. (In the case of pasteless type, after applying putty, we go on sticking tape.)
We apply finish putty (on putty) as if covering tape. After drying it, we rub with sand paper, and flatten it, then wipe off occurred powder.
At the outer edge part, we attach corner reinforcing tape or called corner guard, not joint tape, then duly execute construction work in the same manner.
We go on puttying at the screw fixing part too, filing similarly and flattening it. When filing, in order not to hurt the board material, we go on finishing politely and speedily.
In any event, operation work of making sticked first coating materials into as if a sheet of flat board is putty work operation.
As it will affect finished situation of painting and so-called decorative cloth very much, although it is not visible after construction work, we can say that it is a very important work process.
Construction work site example at our company
We are briefly explaining construction work site example at our company as follows.
As it is the work site of introducing『 laminated plastic sheet 』in our terminology series last time too.
We are briefly explaining construction work situation of executing putty at the board material.
Before executing construction work, and on the way
This is just after starting putty construction work operation. Situation before construction work is vivid behind too.
After construction work
This is after construction work of former above picture. Not to occur unevenness, puttying and filing have completed.
Finally
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Please do not hesitate to compare our quotation with other plural possible contractors, as we welcome your comparing competitive quotations.
「How much is approximate construction work price? How to execute construction work of this part？」and so on. We welcome your relative counselling・inquiry to us light heartedly!
On office renewal・shop or store redecoration・recovery and restoration work・reform work(interior decorative work) and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Followings are SNS links which our company is managing.
Three colored clicking marks: Instagram, Twitter, Facebook.
Instagram 
Twitter 
Facebook 
We are waiting for your clicking, follow・nice!
～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～
★Interior decorative construction work contractor at Ikebukuro★
★Recovery and restoration work・full set of interior decorative work・office relocation★
Kikuchi Souken Co., Ltd.
〒171-0014
Address：4th floor, Musashiya No.3 building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Phone: 03-5985-4252
～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～
Hello! We are Kikuchi Souken Company Limited.
We are doing construction of「Interior finishing work」「Interior restoration work」for you, mainly at Ikebukuro area, and also in all over Kanto area.
It is continuing unstable weather these days, isn’t it?
Today, we are doing LGS(=light gauge steel) work and board work for our tenant customer.
What is LGS?
It is an abbreviation of Light Gauge Steel or Light Gauge Stud.
Its meaning is a kind of steel of light gauge specification.
LGS is a general name whose meaning is「wall」for tenant interior finishing work and the like.
Just like skeleton wall(=indispensable wall for building structure), as we often glue cloth paper on the surface, it originally looks existing wall characteristically.
Now, we are going to explain as follows:
LGS work:
As our preparation beforehand, along the layout drawing(partition line), we do the marking work (marking at floor and ceiling) . Here, we carry out the final subtle adjustment work or so forth, then mount them at floor and ceiling with LGS material.
This mounting work is called 「LGS work」.
Plainly speaking, its meaning is the pillar mounting work up to ceiling with LGS.
In the past days, carpenters used to mount framework with wood material, however as this method is not good for preventing humidity or bad insect, and its material cost is also high, so LGS is popular these days.
※Steel thickness of LGS is 5mm, very thin and light material.
Board work:
After mounting framework, then we go on glueing gypsum board(PB, also called plaster board).
For sound insulating and preventing dew condensation purpose, we can also place heat insulating material (glass wool) inside.
Finally, in order to get rid of joint of the board visually, we neaten putty evenly.
If the backing is not well, the wall paper is not fixed well, so the finishing situation is not good, so we are working carefully enough.
We are very glad that LGS wall surface material is abundant after all.
Using calm and woodie appearance, or using drastic colors, or glueing tile or so on.
As it can be freely designed, so our company staff are using LGS at a lot of work site every day.
That is all for today.
Asking for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction finishing, our company is directly managing by ourselves, omitting our needles cost in-between. So we are supplying more reasonable and better products to you.
Of course, we do not mind at all if you compare our offer price with others, as we welcome it.
‘’Which construction company should I ask to work? How much is the construction cost? and so on.’’
Besides above also, we are waiting for your question and inquiry.
『Office/shop and store/warehouse moving』, interior restoration work, reform work(interior finishing work) and so on.
Please feel free to contact us in the first place.
～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company, ask Kikuchi Souken Co.Ltd.★
★If you also look for office restoration work in Tokyo, ask Kikuchi Souken Co.Ltd.★
Kikuchi Souken Company Limited
Address:〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Phone: 03-5985-4252
～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～