At this time, we thank you so much for browsing『Kikuchi Souken Co.,Ltd.』homepage.

Our company office is based at Ikebukuro, Toshima ward, Tokyo, and
we are an interior decorative construction contractor/company taking charge of full set of
『Interior decorative construction』・『Original state recovery and restoration construction』in all over Kanto district for you.

Today, we are explaining the difference between reform work and renovation work on the building repair and improvement.

You may think that these two work terms are similar. But, in fact, they are the work methods with two different kinds of approach.

We are explaining the respective features and the different points of usage.

What is reform work？

Reform work is, a work method of executing interior decoration and facility repair and improvement without changing the existing building structure.

Specifically, re-sticking wall paper, changing floor material, renovation of the kitchen and bath room, and so on are included.

It is mainly executed at the residence and the commercial facility. The purpose is, tuning up become old or become unfunctional part to make into a new situation.

Reforming is a relatively small scaled work. The building basic structure is not changed.

What is renovation work?

Renovation work is, a work method of recycling into a new valued building
by adding to change the building structure, design and layout.

While diverting an old building or a factory into a living house, or preserving a historical building,
it is used to repair and improve for matching the modern life style.

On renovation, we sometimes change the building layout and appearance drastically.
Therefore, while maintaining the building basic identity, we create a space which is suitable to new usage.

The point of proper use respectively

The purpose and range

・As reforming is done for repair, improving, and renewal at the existing part, it is a partial work.
It is mainly done at a living house and commercial facility.

・Renovation is done for a whole building repair and improvement, so it is often used
for recycling the historical building and factory.

Whether or not to change the structure

・Reform is mainly done for repair and improvement of interior decoration and facility,
so the building structure is not changed.

・Renovation is sometimes done to add for changing the building structure and layout.

Aiming value

・The main purpose of reform is enhancing functionality and beautiful appearance, so,
the basic identity does not change.

・Renovation is important to give birth to a new value.
So, while keeping the building characteristics, it creates more charming space.

Summary

Both of reform work and renovation work are for building repair and improvement methods.

However, there are differences of the purpose, range,whether or not there is a structural change and so on.

Reform is mainly done for interior decoration and facility repair and improvement, so, partial repair and improvement are mainly done.

On the other hand, renovation is a whole building repair and improvement, so, it is recycling a new valued building.

Before the construction, it is important to select a suitable method to match the purpose and requiring content of change.

Building repair and improvement is a wonderful effort for giving birth to more comfortable and charming space.

Please try to consider to execute a work for matching the purpose by all means.

Finally,

The work costs are greatly different according to contractors.

Therefore, we recommend you to obtain【plural competitive quotations】.

In the first place, after comparing each quotation, please consider to give us your order.

From price quotation to construction work completion process,
our company directly manage and do all of construction work by ourselves.

So, we are supplying
「reasonable construction work result as much as possible with high quality and good things」
to our customers.

《Office・shop or store(tenant property)》renewal work・renovation decorative work(reform work)・
original state recovery and restoration construction・repair and improvement work(reform work)・
original state recovery and restoration work,
from partial repair and remedial work to full set of interior decorative work, we are glad to receive your order.

Please give us your relative inquiry light heartedly in the first place, as we are waiting for your contact whole heartedly.

お問い合わせ

Instagram

Twitter

Facebook

We sometimes update SNS social media too.

We are waiting for your follow that it is good♡ too by all means.

～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～

★If you look for an interior decorative construction contractor
at Ikebukuro, it is Kikuchi Souken Co., Ltd.★

★If you also look for original state recovery an restoration construction in Tokyo,
it is Kikuchi Souken Co.,Ltd.★

Address: 〒171-0014

4^th floor, Musashiya No.3 Building,
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo

Phone: 03-5985-4252

～～～～～～～INTERIOR DECORATIVE CONSTRUCTION CONTRACTOR～～～～～～～

由衷感谢各位观看『菊池综建株式会社』的网页！

大家好！这里是菊池综建株式会社的网站。

以东京都丰岛区池袋为办公据点，在关东全域范围内，我们公司正在从事施工整套『室内装饰施工』・『修复原状施工』的『室内装饰施工业界者（室内装饰公司）』，为客户服务。

此次，我们将要介绍、说明

「关于木工活施工」。

作为室内装饰业界者来说，木工活施工是非常重要的技术之一。

木工活是，加工木材后，可以做出美丽室内装饰和家具的技术之一。

此次，从室内装饰业界者的视点来说，我们想要解说一下木工活。

木工活施工工事的种类

木工活有各种各样的种类。

我们来介绍一下有代表性的：

・制作造作家具

・制作建具（门、窗户等）

・天棚、壁、地板地面的面板加工

・制作收纳家具（壁橱、架子、抽屉）

・施工木制地板

・制作木制扶手、架子

把这些木工活施工，我们好好理解客户的要求后，我们一边考虑设计和功能性，一边选择最合适的材料和加工办法。

材料的选择办法

对于室内装饰业界者来说，怎样选择材料是非常重要的。

木材有各种各样的种类，所以，由每个材质和特性，加工办法和使用目的都不同。

比如说，建具的材料要求是，又牢固，歪度又少。

另一方面，对于收纳家具，适合于重视较很高耐久性和美丽的材料。

室内装饰业界者，合对着客户要求和目的，选择合适材料是重要的。

并且，选择材料之际，也需要考虑好价格、供应量、环境。

木工活施工的流程

关于木工活施工的流程，我们举上如下室内装饰业界者一般性的顺序。

1.讯听客户的要求和目的。

2.选定材料和报价。

3.制作设计图样。

4.切割材料后，来加工。

5.根据必要，施行涂装和/或最后加工处理。

6.搬入现场后，设置、安装。

7.最后确认，和把它交给客户。

※注意点

木工活施工，需要安全地做作业和注意用具的使用办法等。

我们如下介绍一下特别的重要点。

・使用锯子、锤子、钻孔器等用具之际，一定带好安全装置，而安全地做作业。

・重要的是，按照木材的种类和用途，选择合适的加工办法，，而做作业。

・因为加工后的木材，在其边上或角部容易发生缺损或伤痕，应该注意。

并且，也施行涂装或最后加工之际，要小心均匀涂抹。

・重要的是，设置或安装之际，使用水平仪或尺子等，正确地定位置。

・木工活施工作业时，也许需要的时间比较长。跟客户会谈和供应材料等也需要时间。因此，需要事先确认工期。

介绍施工事例

我们在世田谷区的某一家租户施行了幌子和长木凳的施工。

首先，幌子木工活施工的照片开始。

①开始解体现有的幌子。

②使用胶合板新施工地基。

③粘贴完地基胶合板后，再从上面粘贴。

④在地基的上面张贴木板。

⑤最后粘贴完后，安装外周

⑥安装完外框后，此后涂装标志等。

幌子的木工活施工到此为止。

下面是长木凳的施工例子照片。

①现在的状态。

②施工地基（胶合板）。

③制作长木凳。

④施工长木凳。

⑤完成

总结

对于室内装饰业界者，木工活施工是非常重要的技术之一。

客户的要求总是，我们理解好客户的要求后，选择合适的材料后，正确地加工和设置。

安全做作业，充分地花时间而好好做最后作业，其结果可以做出美丽的室内装饰和家具。

本公司也在制作使用木材的建筑物和家具等。

关于我们的报价，按照各位的要求，我们考虑按照要求内容后，来提供尽可能适当的计划。

首先，请给我们随意地询问！

请一起看这边

什么是修改施工工事？关于和更改装饰工事的不同点

https://kikusou-gr.com/wp/kaisyu-kouzi-ch2022/

最后

我们公司，从报价到施工完毕，全部都是自己在安排和施工。

因此，我们给客户在供应「尽可能便宜的、质量高的好产品」。

施工费用，按照各个业界者，常常大大不同。因此，我们推荐各位货比三家。

请把我们的报价，也和其它公司的比较一下。务必考虑给我们各位的订单。

《办公室・店铺（租户）》的更新施工・更改装饰施工・修改施工（整建整修施工）・修复原状施工，从部分修补施工到整套室内装饰施工，我们正在都应对的。

https://kikusou-gr.com/wp/contact/

首先，请随意地给我们有关查询。我们衷心在等待。

Instagram 　 Twitter　　Facebook 　

请随意地点击（哒哒），各位的关注・跟随，也真不错♡！

～～～～～～～～～～～～～～～～～～池袋～～～～～～～～～～～～～～～～～～

★如果各位想找池袋的室内装饰业界者，就找菊池综建株式会社★

★如果各位也想找东京的修复原状施工，就找菊池综建株式会社★

邮政编号:　〒171-0014

公司所在地: 东京都丰岛区池袋2-62-10 武藏屋第三楼四层

电话: 03-5985-4252

～～～～～～～～～～～～～～～～～室内装饰施工单位～～～～～～～～～～～～～～～～～

We thank you so much for browsing『Kikuchi Souken Co.,Ltd.』homepage.

This time, we are explaining,

「Fitting/fixture/joinery frame installing work」

Firstly, as there may be many of you who wonder what is「fitting/fixture/joinery frame」?
So, we are briefly explaining it.

What is fitting/fixture/joinery frame？

Fitting/fixture/joinery frame is, a framework installed on the building wall surface or floor,
which is the framework for fixing fitting/fixture/joinery (door and window).

There are various kinds of fitting/fixture/joinery, and the shapes
and material qualities are selected to match the building usage and design.

As they are installed inside or outside the building, they are considered not only for the visual beauty,
but also for the security and durability.

The places to install fitting/fixture/joinery frame

The places to install fitting/fixture/joinery frame are as follows:

Door frame:
It is the framework to install the door, and its role is to divide inside and outside of the building.

Window frame:
It is the framework to install the window, and it is often designed to consider heat insulating property and security.

Sliding door frame:
It is the framework to install sliding door. As it can be opened and closed with little space, it is often used at the living room, western-style room and so on.

Foldable door frame:
It is the framework to install foldable door. As it can be opened and closed with little space, it is often used at the closet, storage space and so on.

They are often installed at the above-mentioned general places.

The main materials of fitting/fixture/joinery frame

Generally, fitting/fixture/joinery frame is made of materials such as wood, metal and so on.

As the fitting/fixture/joinery made of wood is relatively inexpensive and easy to process,
processing at the construction site is possible.

However, its demerit is weak against humidity and insect damage.

While, the fitting/fixture/joinery frame made of metal is more durable than that made
of wooden material, and it has a merit of high safety in case of fire.

As the metal materials such as aluminum, steel, and so on are light and strong,
so the maintenance is easy.

Therefore, they are also suitable to large-scale buildings such as high buildings and commercial facilities.

The main materials of fitting/fixture/joinery frame are the following kinds:

①Steel fitting/fixture/joinery frame:
It is the steel-made very strong framework, and it excels in security and durability.

②Wooden fitting/fixture/joinery frame:
It is the wooden fitting/fixture/joinery frame, and its wooden texture is beautiful with giving warmness to the space.

③Aluminum fitting/fixture/joinery frame:
It is the aluminum alloy made light and strong fitting/fixture/joinery frame, and it excels in durability, so the maintenance is easy.

④PVC fitting/fixture/joinery frame:
It is the vinyl resin made light and strong fitting/fixture/joinery frame,
which excels in antiseptic・durability, and the maintenance is easy too.

⑤Composite material fitting/fixture/joinery frame:
It is the plural material combined made fitting/fixture/joinery frame,
whose each material features are utilized and exhibited excellent property.

As for fitting/fixture/joinery frame, according to the opening and closing directions,
there are right direction opening use and left direction opening use.

It is necessary to select either proper direction opening and closing to match the building layout.

Fitting/fixture/joinery frame is installed with the fitting/fixture/joinery
at the construction site. After that, it generally becomes an invisible part.

However, it plays an important role for the building function and design.

The installation work contents of fitting/fixture/joinery frame

The installation work contents of fitting/fixture/joinery frame is,
one of the important process at the site.

Here, we are explaining the fitting/fixture/joinery frame installation work in order.

We prepare to install the fitting/fixture/joinery frame.

We check the fitting/fixture/joinery frame size and installing place,
then we prepare the necessary materials and tools for installing it.

In addition, we clean the wall surface, floor surface,
and secure the necessary space to install the fitting/fixture/joinery frame.

We decide the place to install the fitting/fixture/joinery frame.

In order to install the fitting/fixture/joinery frame precisely, we use measurement tools such as level, marker and so on,

After deciding the installing place, we make the framework to install fitting/fixture/joinery frame.

By making this framework, it is possible to install fitting/fixture/joinery frame precisely.

After completed to make the fitting/fixture/joinery frame framework, we install the fitting/fixture/joinery frame.

When installing fitting/fixture/joinery frame, we use special metal tool and small screw,
and we check the vertical, horizontal, parallel and other balance, then install it with adjusting.

After installing the frame, we install the fitting/fixture/joinery.

To install the fitting/fixture/joinery, it is necessary to match the size of fitting/fixture/joinery frame and the fitting/fixture/joinery size.

In addition, it is also necessary to carry on installing the fitting/fixture/joinery place and direction precisely.

The above are the general flowing of fitting/fixture/joinery frame installing work.

Next, we are explaining a construction example.

Construction example

This is a tenant (store) new decorative construction at Oomiya, Saitama prefecture.

The following are the construction pictures when installing fitting/fixture/joinery frame.

We put on the fitting/fixture/joinery frame, and fully check that it is properly installed in the frame, then install the door finally.

Summary

Fitting/fixture/joinery frame installation work is,
one of the necessary important process to complete the building, and it needs precise installation.

When doing fitting/fixture/joinery frame installing work,
we propose you to do operation work safely by requesting a professional work contractor.

Finally,

As construction cost greatly differs according to each contractor,
we recommend you to obtain【plural competitive quotations】.

In the first place, please compare each quotation, and we would like to request you to place your order to us hopefully.

From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.

We are supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.

On《office・shop or store(tenant)》renewal work・redecoration work
recovery work(reform work)・original state recovery and restoration work,
from partly repair work to full set of interior decorative construction,
we are receiving and executing your order.

Kindly give us your inquiry light heartedly in the first place.
We are waiting for your contact.