Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative work contractor mainly executing《Interior decorative construction work》generally《Recovery and restoration construction work》for you.
《Variety goods store│new decorative construction work at a commercial facility tenant》
We are explaining this time is, a construction work site at a tenant of commercial facility in Ikebukuro.
The contents of new decorative construction work is, a construction work for variety goods store.
In the event of opening a variety goods store, we will execute design interior decorative work whose level does not spoil the image of selling variety goods. We hear that this variety goods store describes an image of luxurious tropical country.
Then, we are simply explaining flows from construction work request to construction work start.
<Flowing of variety goods store interior decorative construction work >
- ・Considering the image of variety goods store interior decorative image, based on its concept.
- ・Making simple layout chart from its image.
- ・Requesting quotation to interior decorative work contractors.
- ・Asking the possible interior decorative work contractors to make the drawing, with reference to the layout chart.
- ・If you agree on the construction work details・price, then requesting the actual construction work to the contractor.
- ・Starting interior decorative construction work(commencement of work).
- ・Final checking prior to construction work completion.
Above is a simple flowing of variety goods store interior decorative construction work.
Variety goods store│new decorative construction work│content details
Construction work kind: new decorative work (tenant work)
Construction work site: second floor at Tobu Department store, 1-25, 1-chome, Nishi-Ikebukuro, Toshima ward, Tokyo
Construction work content details:
Succeeding the former tenant as the former decorative furnished situation, we strip existing so-called decorative cloth and board. We executed LGS(=light gauge steel) work, board finishing work, hole filling work operation by adjusting ceiling light lighting quantum, doing putty treatment work operation, fitting fixture (frame) work operation, sticking so-caller decorative cloth, and so on.
We briefly treat work where to be able to succeed as it is.
We are explaining work details together with construction work site pictures as follows.
We strip so-called decorative cloth sticked on the existing wall.
As we will use the existing wall, we write down a draft where to open a hole, and open a rectangle hole precisely.
LGS work
LGS work is, a kind of construction work of installing ceiling and floor bedding material, in order to divide space, at the office・shop or store・commercial facility and so on. We use thin steel made material.
As it is different from wooden material, it is durable against water and humidity. Therefore, as it is free from worrying about burning down too, it is often used at the present interior decorative work site.
Its construction work place can be mainly pointed out to be, ceiling and wall framework or structure. This time, it is used to divide space.
Features of LGS are,
- 【It can satisfy fireproof standard, comparing with wood.】
- 【It can shorten construction work period.】
- 【Its construction work unit price is low.】and so on.
There are variousof merits, so it is becoming a mainstream for the present interior decorative construction work.
We use LGS to divide the space.
Board finishing construction work
Board work is, a kind of so-called decorative cloth bedding work at the ceiling and wall.
Specifically, it is an execution work of going on sticking gypsum board(plaster board) on the wall and ceiling.
Gypsum board used for bedding is assumed as a role such as,
- 【Thermal insulation】
- 【Sound isolation】
- 【Fire resisting】
Depending on execution method, there are wide varieties of functions and kinds of (double sticking and the like).
On board, please refer to our following site page article.
[Interior decorative work━board work] On gypsum board, explaining again.
https://kikusou-gr.com/wp/board-work/
Fixture work
Fixture work is, a kind of construction work to fit partition to be able to open and close at the construction open part.
It is mainly used as wall door and window.
As the usage of executing fixture work, there are purposes and usages of entrance, air vent, lighting, sound insulation, crime prevention and so on. Various types of fixtures are installed.
The following construction work picture is under curing after fitting fixture.
We are well protecting not to let materials scatter or not to let tools touch to make dirty or damage during work operation.
Please visit here as reference → curing materials
After fitting fixture to the door.
Under construction work of curing material.
We fill hole vacancy work operation to reduce lightings which the former tenant used.
Because of the store design, some of the existing lightings are used as they are. In order to reduce light quantum, we take off certain lighting equipment, and cut board to match the size of former lighting equipment hole. Then, we fill the board to hammer screw into framework.
After finishing all the place of board work(bedding) process, we do putty treatment at the board gap.-
If we would not carry out putty treatment here, we could not stick so-called decorative cloth (wall paper) neatly.
After embedding the gap, we go on moving to work operation of sticking so-called decorative cloth.
Above these are all of the construction work site pictures this time.
On putty treatment, please refer here.
[Interior decorative construction work Term series] On putty treatment.
https://kikusou-gr.com/wp/board-work/
Summary
This time, we explained a construction work example of variety goods store as above.
By executing construction work with properly using former tenant decorative furnished situation, it is possible to reduce construction work cost markedly too, by succeeding usable places as they are, and by getting rid of where is not used.
If you are considering to request interior decorative work with a property of former partly usable decorative furnished situation, please be sure to talk with us light heartedly by all means.
Finally.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Please do not hesitate to compare our quotation with other plural possible contractors’, as we welcome your comparing competitive quotations.
「Which construction work contractor should I request? How much is approximate construction work cost? and so on.」
《On office・shop or store(tenant) 》renewal work・redecoration work・repair work(reform work)・recovery and restoration work, small scale repair interior decorative work and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Three colored clicking marks: Instagram, Twitter, Facebook.
Kindly click following is nice♡ too light heartedly.
～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～
★If you look for interior decorative work contractor at Ikebukuro,it is Kikuti Soken Co.Ltd★
★If you also look for recovery and restoration work in Tokyo, it is Kikuchi Souken Co. Ltd★
Phone: 03-5985-4252
～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～
Hello, everyone! This is Kikuchi Souken Company Limited website.
Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of《 Interior decorative construction work 》generally and《 Recovery and restoration construction work 》for you.
We wrote and uploaded 『 Interior decorative construction work Technology series 』newly established starting from last time.
This time, it is our second article.
https://kikusou-gr.com/wp/yougoseris1-202303/
There may be existing this kind of information already in the internet.
However, our company coordinate by ourselves here, and we are introducing our construction work site pictures which can be prepared if any.
We are going to write and upload articles which you can finish reading relative easily.
So, we are glad if you will read them light heartedly.
What is putty treatment? Why it is necessary to do it?
Putty treatment in interior decorative construction work, is said to be a work operation of going on to putty up paste form overlaying or cladding material=putty, and flatten 凹凸, in order to get rid of surface 凹凸, after sticking base material such as gypsum board or so.
There are various sizes of board materials. In the case of gypsum board, the standard size is length × width as 910mm×1820mm.
Edge of this board size is a little angular. Even if sticked tightly, the joint part is becoming rather 凹凸.
(Occurring 凹凸 situation is called「 occurring unflat」.)
Gypsum board image picture.
Quoted from: Yoshino Gypsum Co. Ltd., official product web page.
After sticking gypsum board, prior to putty treatment situation. Showing here that there is凹凸 at the joint part and screw fixing place.
At the first coating material, we go on doing screw fixing (fixing board use screw by electric driver) basically. In order to prevent from occurring 凹凸 here too, we also treat to embed putty from the board material.
But, only with that treatment, we still cannot say that the surface is flat. If we do not go on making all of the sticked boards into a sheet of board, after painting and executing construction work of so-called decorative cloth (wall paper), it may lead to occurring wrinkle or floating. Chances are that it may lead to happen peeling of so-called decorative cloth or crack thereafter.
Therefore, a work process of formulating paste form or powder putty agent, and applying wall, and flattening the surface is becoming indispensable.
Putty treatment construction work method
Puttying is done twice, or three times dividedly.
In the case of twice, they are called ①under putty, ②finish putty(on putty).
In the case of three times, they are called under putty, mid under putty, on putty, or so forth.
By using flat wide stainless spatula called「 putty spatula」, we go on applying putty agent on the board which was prepared for putty board.
At the joint part, we stick a kind of tape called joint tape tightly so as not to be peeled off.
Then, we go on applying under putty on that. (In the case of pasteless type, after applying putty, we go on sticking tape.)
We apply finish putty (on putty) as if covering tape. After drying it, we rub with sand paper, and flatten it, then wipe off occurred powder.
At the outer edge part, we attach corner reinforcing tape or called corner guard, not joint tape, then duly execute construction work in the same manner.
We go on puttying at the screw fixing part too, filing similarly and flattening it. When filing, in order not to hurt the board material, we go on finishing politely and speedily.
In any event, operation work of making sticked first coating materials into as if a sheet of flat board is putty work operation.
As it will affect finished situation of painting and so-called decorative cloth very much, although it is not visible after construction work, we can say that it is a very important work process.
Construction work site example at our company
We are briefly explaining construction work site example at our company as follows.
As it is the work site of introducing『 laminated plastic sheet 』in our terminology series last time too.
We are briefly explaining construction work situation of executing putty at the board material.
Before executing construction work, and on the way
This is just after starting putty construction work operation. Situation before construction work is vivid behind too.
After construction work
This is after construction work of former above picture. Not to occur unevenness, puttying and filing have completed.
Finally
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.
Please do not hesitate to compare our quotation with other plural possible contractors, as we welcome your comparing competitive quotations.
「How much is approximate construction work price? How to execute construction work of this part？」and so on. We welcome your relative counselling・inquiry to us light heartedly!
On office renewal・shop or store redecoration・recovery and restoration work・reform work(interior decorative work) and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact to us.
https://kikusou-gr.com/wp/contact/
Followings are SNS links which our company is managing.
Three colored clicking marks: Instagram, Twitter, Facebook.
Instagram 
Twitter 
Facebook 
We are waiting for your clicking, follow・nice!
～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～
★Interior decorative construction work contractor at Ikebukuro★
★Recovery and restoration work・full set of interior decorative work・office relocation★
Kikuchi Souken Co., Ltd.
〒171-0014
Address：4th floor, Musashiya No.3 building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Phone: 03-5985-4252
～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～
大家好！我们这里是菊池综建株式会社的网站。
在东京都丰岛区池袋设置着公司办公据点，在关东地区全部地域范围内，我们正在经营和施工全部的《室内装饰施工工事》和《修复原状施工工事》，为客户服务。
从上次开始，我们在本网站里新设了『室内装饰施工工事 术语集锦』。
此次是第二个文章。
看来，因特网上已经存在着那种集锦。
不过，作为我公司职员，自己来总括，而也可以准备有关施工照片的场合，我们就一起来介绍。
我们就要作为可以比较简单读完的内容，所以希望各位乐意地阅览一下，那么我们很高兴。
Q什么是油灰处理？为什么需要做那个？
室内装飾工事の灰処理とは,基礎材を石膏ボード等に貼った後,表面の凹凸を除去するために,tがペースト状の肉様材料=油灰に打ち込み,徐々に作業を平準化していくという。
シートは様々なサイズで来る。 石膏シートの場合、一般的なサイズは、910mm×1820mmの縦と横のサイズです。
その大きさの板材は,その角部にやや角がある. 正確には、投稿の場合には、接続部分もかなりバンプになります。
(凹凸が現れる状態を「出凹凸」という)
石膏板的印象图像。
引用：吉野石膏公司正式商品网页
张贴石膏板后，油灰处理前的样子。看得出来连接部分和螺钉安装部位处有凹凸。
并且，在地基材料，基本上，我们就安装螺钉安装部位（把板材用的螺钉，使用电动螺丝刀来安装）。
不过，为了这个也不出来凹凸，我们从板材的表面也处理埋进去。
但是，只是那个处理的话，表面还是不可以说平坦。如果要不把被张贴的板材都逐步作为一张板似的话，后来，涂装和施工所谓的装饰用织物（壁纸）之际，会出现皱纹或浮动。以后，根据情况，所谓的装饰用织物有可能引导剥掉和破裂。
因此，提炼糊状或者粉末油灰剂，而涂抹壁上后，把表面弄平坦。这些工程成为不可缺少。
油灰处理的施工方法
油灰处理是两次或三次，都分别而做。
做两次的场合，①下油灰，②最后加工油灰（上油灰）
做三次的场合，下油灰，中油灰，上油灰，等 就叫做这些。 我们使用叫做「油灰抹刀」的又平又横宽的不锈钢抹刀，而在油灰板准备过的油灰剂逐步涂抹板材。
在连接部位，我们把叫做连接胶带的胶带，为了避免剥离来紧贴。
我们在上面逐步涂抹下油灰。（无糊类型的场合，涂抹油灰后，逐步张贴胶带）
我们把胶带掩盖，涂抹最后加工油灰（上油灰）。把它干燥后，我们打磨砂纸，弄平后，擦掉发生过的粉末。
在出角部分，张贴或安上的不是连接胶带，就是角部补强胶带或者角部保护器，而同样来施工。
我们在小螺钉安装部位也涂抹油灰，同样打磨鑢，逐步弄平坦。
打磨鑢之际，为了避免损坏板材，我们又周到又迅速地做完。
总之，把在地基材料粘贴过的板材，成为仿佛一张平坦板的作业叫做油灰作业。
此作业会影响涂装和所谓的装饰用织物的最后加工结果。因此，施工后，虽然在外边看不到，但它可以说是个非常重要的工程。
我们公司的施工事例
我们简单地要介绍一下本公司的施工事例。
我们在上次写的用语集锦『薄片层压塑料膜』里也介绍过施工现场。
为了施工室内上边部分装饰壁的所谓装饰用的织物，我们简单地来介绍一下在板材施工油灰的样子。
施工之前，中途
这张是刚开始施工油灰作业后的样子。在后边施工之前的样子也很清晰。
施工之后
这张是把上一张施工后的样子。为了不出不平坦（凹凸），做完了涂抹油灰，打磨鑢。
最后
从报价到施工完毕，我们公司全部都是亲自安排施工工事，我们的目标是给客户供应「尽可能便宜的、质量高的好产品」。
请不客气地把我们的报价和其它单位的复数同行业界报价比较一下。我们也欢迎各位的货比三家。
「施工工事费用大概需要多少钱? 这个部分怎样做工事好? 」
等，请乐意和我们商量・查询业务！
关于办公室的翻新・店铺改装・修复原状施工工事・整建整修工事（室内装饰工事）等，首先请乐意来商谈・查询！我们正在等待各位来联络。
https://kikusou-gr.com/wp/contact/
现在，我们公司经营的SNS（社交网络服务）链路一栏。
Instagram Twitter Facebook
我们等待各位的点击、追踪、关注，即真不错！
～～～～～～～～～～～～～～池袋～～～～～～～～～～～～～～
★我们是池袋的室内装饰施工工事行业单位★
★修复原状施工工事・整套室内装饰工事・办公室的搬迁★
菊池综建株式会社
邮政编号: 〒171-0014
东京都丰岛区池袋2-62-10 武藏屋第三楼四层
电话: 03-5985-4252
～～～～～～～～～～室内装饰施工工事单位～～～～～～～～～～