Hello, everyone! This is Kikuchi Souken Company Limited website.

Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative work contractor mainly executing《Interior decorative construction work》generally《Recovery and restoration construction work》for you.

 

 

 

《Variety goods store│new decorative construction work at a commercial facility tenant》

We are explaining this time is, a construction work site at a tenant of commercial facility in Ikebukuro.

 

The contents of new decorative construction work is, a construction work for variety goods store.

In the event of opening a variety goods store, we will execute design interior decorative work whose level does not spoil the image of selling variety goods. We hear that this variety goods store describes an image of luxurious tropical country.

 

Then, we are simply explaining flows from construction work request to construction work start.

 

 

 

<Flowing of variety goods store interior decorative construction work >

• ・Considering the image of variety goods store interior decorative image, based on its concept.
• ・Making simple layout chart from its image.
• ・Requesting quotation to interior decorative work contractors.
• ・Asking the possible interior decorative work contractors to make the drawing, with reference to the layout chart.
• ・If you agree on the construction work details・price, then requesting the actual construction work to the contractor.
• ・Starting interior decorative construction work(commencement of work).
• ・Final checking prior to construction work completion.

 

Above is a simple flowing of variety goods store interior decorative construction work.

 

 

 

Variety goods store│new decorative construction work│content details

 

Construction work kind: new decorative work (tenant work)

Construction work site: second floor at Tobu Department store, 1-25, 1-chome, Nishi-Ikebukuro, Toshima ward, Tokyo

 

Construction work content details:

 

Succeeding the former tenant as the former decorative furnished situation, we strip existing so-called decorative cloth and board. We executed LGS(=light gauge steel) work, board finishing work, hole filling work operation by adjusting ceiling light lighting quantum, doing putty treatment work operation, fitting fixture (frame) work operation, sticking so-caller decorative cloth, and so on.

We briefly treat work where to be able to succeed as it is.

 

We are explaining work details together with construction work site pictures as follows.

 

 

 

 

 

LGS work

LGS work is, a kind of construction work of installing ceiling and floor bedding material, in order to divide space, at the office・shop or store・commercial facility and so on. We use thin steel made material.

As it is different from wooden material, it is durable against water and humidity. Therefore, as it is free from worrying about burning down too, it is often used at the present interior decorative work site.

Its construction work place can be mainly pointed out to be, ceiling and wall framework or structure. This time, it is used to divide space.

 

Features of LGS are,

 

• 【It can satisfy fireproof standard, comparing with wood.】
• 【It can shorten construction work period.】
• 【Its construction work unit price is low.】and so on.

 

There are variousof merits, so it is becoming a mainstream for the present interior decorative construction work.

 

 

 

 

 

Board finishing construction work

Board work is, a kind of so-called decorative cloth bedding work at the ceiling and wall.

Specifically, it is an execution work of going on sticking gypsum board(plaster board) on the wall and ceiling.

 

Gypsum board used for bedding is assumed as a role such as,

• 【Thermal insulation】
• 【Sound isolation】
• 【Fire resisting】

 

Depending on execution method, there are wide varieties of functions and kinds of (double sticking and the like).

On board, please refer to our following site page article.

[Interior decorative work━board work] On gypsum board, explaining again.

https://kikusou-gr.com/wp/board-work/

 

 

 

 

 

 

Fixture work

Fixture work is, a kind of construction work to fit partition to be able to open and close at the construction open part.

It is mainly used as wall door and window.

As the usage of executing fixture work, there are purposes and usages of entrance, air vent, lighting, sound insulation, crime prevention and so on. Various types of fixtures are installed.

The following construction work picture is under curing after fitting fixture.

We are well protecting not to let materials scatter or not to let tools touch to make dirty or damage during work operation.

Please visit here as reference → curing materials

 

 

 

 

 

We fill hole vacancy work operation to reduce lightings which the former tenant used.

 

Because of the store design, some of the existing lightings are used as they are. In order to reduce light quantum, we take off certain lighting equipment, and cut board to match the size of former lighting equipment hole. Then, we fill the board to hammer screw into framework.

 

 

 

 

 

After finishing all the place of board work(bedding) process, we do putty treatment at the board gap.-

If we would not carry out putty treatment here, we could not stick so-called decorative cloth (wall paper) neatly.

After embedding the gap, we go on moving to work operation of sticking so-called decorative cloth.

Above these are all of the construction work site pictures this time.

On putty treatment, please refer here.

[Interior decorative construction work  Term series] On putty treatment.

 

https://kikusou-gr.com/wp/board-work/

 

 

 

Summary

This time, we explained a construction work example of variety goods store as above.

 

By executing construction work with properly using former tenant decorative furnished situation, it is possible to reduce construction work cost markedly too, by succeeding usable places as they are, and by getting rid of where is not used.

 

If you are considering to request interior decorative work with a property of former partly usable decorative furnished situation, please be sure to talk with us light heartedly by all means.

 

 

 

Finally.

 

From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.

 

Please do not hesitate to compare our quotation with other plural possible contractors’, as we welcome your comparing competitive quotations.

 

「Which construction work contractor should I request? How much is approximate construction work cost? and so on.」

 

 

《On office・shop or store(tenant) 》renewal work・redecoration work・repair work(reform work)・recovery and restoration work, small scale repair interior decorative work and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact to us.

 

https://kikusou-gr.com/wp/contact/

 

Instagram     Twitter   　Facebook    

 

Three colored clicking marks: Instagram, Twitter, Facebook.

Kindly click following is nice♡ too light heartedly.

 

～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～

★If you look for interior decorative work contractor at Ikebukuro,it is Kikuti Soken Co.Ltd★

★If you also look for recovery and restoration work in Tokyo, it is Kikuchi Souken Co. Ltd★

 

Phone: 03-5985-4252

～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～

 

Hello, everyone! This is Kikuchi Souken Company Limited website.

Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of executing construction work of《Interior decorative construction work》generally《Recovery and restoration construction work》for you.

 

This time, we are thinking of roughly explaining,

 

Inspection hole, and its installation construction work, which comes to be related to interior decorative construction work, and its facility work.

 

What is inspection hole? And on its role.

 

Inspection hole is, by executing construction・installing at the ceiling, wall, floor and so on, you will be able to check and diagnose・examine inside situations.

 

As we will below-mention it, however, according to what to be「watched・checked」inside, it is executed construction・installation at various places.

 

Places where inspection hole is installed.

 

Ceiling

 

 

Inspection hole installed at the ceiling, is called「ceiling inspection hole」just as it is.

According to various checking items, there are a lot of plural places existing on the same floor too.

 

According to manufacturers, there are such products named as「ceiling hatch」「high hatch」and so on. Hatch=moving up and down way, entrance hole with lid.

 

Main inspection items are:

 

• ●Electricity, internet wiring.
• ●Ventilating fan duct.
• ●Housing diagnosis.

and so on.

 

However, as for interior decorative construction work, if stain of water leakage at the ceiling due to rain leakage should be found, situations are checked from inspection hole too. Or, inspection hole may be tentatively newly installed, and may be checked inside.

 

As for residence which has attic storage, there is such kind of ladder for moving up and down at attic, a ladder when it opens, it will come to be pushed out as open hole part too.

 

Above these can be also said a kind of inspection hole, as the meaning of attic inspection.

 

In old Japanese style residence, chances are that there is not inspection hole often.  Such residence at upper part of closet storage or a sheet of board at storage space above closet can be pushed and removed. From there, inspection and diagnosis can be carried out.

 

Wall

 

There are not many places which is attached to wall inspection hole.

In many cases, it is installed inside housing apartment, unit bath, or washroom.

 

Its main inspection item is,

 

Piping arrangement (water supply and drainage equipment)

 

Underfloor inspection hole

 

 

Underfloor inspection hole can be often noticed at the kitchen, and it is often combined with underfloor storage too.

 

Its main inspection items are,

 

• ●Underfloor piping arrangement(water supply and drainage)
• ●Residence diagnosis(Basic situation, grasping termite and ant damage situation, humidity and so on)

 

As this, inspection hole inside is usually not noticed very much.

Naturally, by checking inside, various situations in the building can be grasped.

So, in building maintenance work operation, it is an indispensable equipment.

 

As we explained above, it is equipped in various places, so all of them are necessary open holes.

 

Regarding temporary installed inspection hole, its procedures.

 

As we explained ceiling inspection hole above, if rain leakage should occur at the ceiling, or if electric wiring should be newly done in the existing building or so, there is an occasion of executing construction work and installing temporary installation of inspection hole.

 

We are roughly explaining its procedures.

 

This time, we are explain by taking up an example of「inspection hole installation for water leakage」.

 

①　Selecting open hole place, and width.

 

Checking rain leakage at the ceiling with eyes. In the first place, checking if the location of water supply and drainage pipe can be noticed from existing inspection hole.

 

If the situation can be grasped from already installed inspection hole, it is not necessary to newly install inspection hole.

 

Check the situation of water supply and drainage pipe from already installed inspection hole first. If it is judged that its cause or problematic place cannot be confirmed or cannot be confirmed from that location, then, we will prepare to install temporary installation of inspection hole at a suitable place.

 

②　Studying temporary installation of inspection hole place（testing, marking）

 

If identification of the cause or grasping the situation could not be done by above ①, then, we go on selecting a place for temporary installation of inspection hole.

 

At closely connected structure building body part, if it should be opened, then, its strength may be going down. While, if the cause identification or grasping situation from opened place cannot be done, then, there is going to be meaningless of opening it.

Therefore, we shall study where to open hole carefully.

 

 

 

 

 

As it is off the subject, however, in order to open inspection hole without hurting bedding material, we sometimes use board cutter too.

 

 

Above is Makita Co. product board cutter reference picture.

It can be eventually cut off by letting blade at picture upper part push against board material, slowly going on to move blade just as drawing a line, then cutting it off.

Picture quoted from Makita Co. official web page.

 

By pushing blade against board material at upper part, slowly going on by moving it, then you will be able to cut it off just as saw.

 

It is possible to adjust blade length, and only cut off board material without hurting bedding material. Transparent area at the right part of the picture is dust box, so it can reduce powder dust.

 

As we may have averted from our explanation a little, when opening hole after all, in order not to hurt bedding material, by using needle for searching bedding or a tool called sensor, then  we cut off board material.

 

③　Cutting off board material, then opening hole. After that, depending on circumstances, strengthening opened inspection hole, and installing inspection hole frame, then it is finish of the installation.

 

Checking the size in advance, and do marking so as to fit the inspection hole, then going on opening hole.

 

As for hollowed out board material, if it does not have hurt, it can be used as the lid as it is. So, we shall store it where it is easy to be located, not to throw it away.

 

 

When opening hole, it will definitely come to require to cut off a piece of joist.

So, we shall do work operation of strengthening opened hole in order to recover strength at the cut off part.

 

After finish strengthening opened hole, finally, we attach outer frame to the opened hole place, and attach hollowed out board material to the inner frame. Then, we fix both with metal fitting. If we can confirm smooth opening and closing, the installation work is thus finished.

 

It seems that there may not be enough chance to look at it carefully, however, in our abovementioned explanation, as there is「standard type」, there are various materials・kinds of inspection hole too.

 

There is an inconspicuous type of it too. So, if you would like to install for regular checking, not for temporarily, we would like to suggest you to tell us of that effect.

 

We so far have explained inspection hole installation above with a little bit redundancy.

 

Explaining construction work example including inspection hole installation.

 

As we previously executed construction work of interior decorative bedding at a food court tenant of commercial facility, we are explaining that situation as below.

 

As it is a large scale renovation, we re-sticked each place of LGS (=light gauge steel) bedding and board material too.

 

https://kikusou-gr.com/wp/construction-work20221015/

 

 

Summary

 

We so far explained What is inspection hole? And the role of installation construction work.

 

• ●Inspection hole is, installed at the ceiling, wall, and floor. It can be carried out for grasping  building various situation, and diagnosis.
• ●Ceiling inspection hole is, enable us to find out appropriate place at first, partly cutting board material and bedding material, opening hole, then installing it.
• ●It can fit various ceiling, there are many kinds.

 

After reading this article, if you should come across uneasy points or need to counselling with us or so, please be sure to give us your inquiry light heartedly.

 

Let alone owner or managing company with rain leakage troubling property or so, please give us your attention if you would like to request these construction work to us as equipment contractor, general contractor or so. We are very happy if you consider to request our quotation in the first place.

 

Regardless of whole or partly construction work, our company is accepting your renovation work, remedial and repair work, mending work and so on.

 

On the whole interior decorative work, or partly participating process work too, please give us your inquiry light heartedly.

 

Finally,

 

From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves, so our aim is supplying 「reasonable construction work as much as possible, and high quality, better work service」to our customers.

 

Please do not hesitate to compare our quotation with other plural possible contractors’, as we also welcome your competitive quotations very much.

「How much is approximate construction work cost?」

「How to execute construction work at this part?」and so on, please give us your counselling・inquiry light heartedly.

 

On office renewal・shop or store redecoration・recovery and restoration construction work・ reform work(interior decorative construction work) and so on, please give us your inquiry in the first place light heartedly, as we are waiting for your contact.

 

SNS links which our company is managing are as follows: Instagram, Twitter, Facebook.

Instagram     Twitter  　Facebook  

We are waiting for your following・I like it！

～～～～～～～～～～～～～～～～～～～～～～～～～IKEBUKURO～～～～～～～～～～～～～～～～～～～～～～～～～

★Interior decorative construction work contractor at Ikebukuro★

★Recovery and restoration work・full set of interior decorative work・office moving★

 

Kikuchi Souken Company Limited

Office address:〒171-0014

 4^th floor, Musashiya No.3 building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo

Phone: 03-5985-4252

～～～～～～～～～～～～～～～Interior decorative construction work contractor～～～～～～～～～～～～～～～