Hello, everyone! This is Kikuchi Souken Company Limited website.

Our company office is based at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are taking charge of

《Interior decorative construction work》generally and《Recovery and restoration construction work》for you.

 

 

 

This time, we think that we will newly start
『Interior decorative construction work terminology series』.

 

There may be existing this kind of information already in the internet.

However, we coordinate in our way, and are also introducing our construction work site pictures here which can be prepared if any.

 

 

We are going to write and upload articles which you can finish reading relatively easily.

 

So, we would be glad if you should read them light heartedly.

 

 

What is die Knock sheet?

※Interior decoration image picture

※Interior decoration image picture

 

 

Die Knock sheet means, a product of「Die knock film」 which 3M Company is selling.

Among construction work contractors, this product is generally called as「Die knock sheet」.

(Die Knock sheet=Die Knock film)

 

 

It is commonly referred to as「decorative sheet」. Its feature is that there are rather many adhesive・construction workable places too. (under-mentioning)

 

 

Its material is vinyl chloride, and the back side is adhesive sheet.
It is executed construction(sticking)at the work site.

 

It has more or less elastic property and thickness.

 

So, we warm it up by using heat gun(weak air flow dryer like electrical appliance), and go on gradually sticking it not to let air bubble come in with spatula or so.

 

Because of 3M Company technic, air bubble is easy to come out from the adhesive face.

 

 

 

Q.Where it is used?

 

A.Interior decorative wall, door, elevator, steel furniture and so on, it can be used at all places, and curved faces too.

 

 

Q.What is its features?

 

Answer

・As abovementioned, it can be constructed at all places.
It can also be sticked at curved faces.

 

・There are 1000 or more referenced products.
It is possible to change the image easily with base material as it is.

 

・It is possible to adopt it outside such as at entrance door, interior decoration, and so on regardless of places, and it also satisfies incombustible property which is indispensable for interior decoration.

 

 

 

What is D board construction work method?

 

D board construction work method is, a work method of sticking die Knock sheet (die knock film) at its product factory in advance, to make finishing situation uniform and beautiful.

 

 

 

 

 

 

Construction work site example of our company

 

We are briefly introducing a construction work site example at our company as follows.

 

At the time before construction work, the door part color is white.

We execute construction of die Knock sheet at the narrow grid part there.

 

ダイノックシート 施工前の様子。ドア枠格子部分

Before executing construction work situation. Attention to the door frame, especially to the grid shaped narrow place.

 

 

 

After executing construction of die Knock sheet situation. Not very clear, however the grid shaped part is changed into wood pattern with vintage feeling. The picture is under construction of painting finish of door frame part.

After executing construction of die Knock sheet situation. Not very clear, however the grid shaped part is changed into wood pattern with vintage feeling. The picture is under construction of painting finish of door frame part.

 

 

 

In this way, construction can be also executed at narrow places and R shaped(curved) parts with this product.

 

 

 

 

Relative terminology

 

●Sangetsu Corporation,Japan『Reatec』・・・Interior decoration use decorative sheet.

Cutting sheet(Nakagawa Chemical Inc., Japan, other common name) ・・・Decorative sheet which can be constructed on vehicles and glass faced signboard (window sign)

 

 

 

 

Finally

 

As construction cost greatly differs according to each contractor, we recommend you to obtain【plural competitive quotations】.

 

In the first place, please compare each quotation, and we would like to request you to place your order to us hopefully.

 

From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.

We are supplying「reasonable construction work as much as possible, and high quality, better work service」to our customers.

 

On《office・shop or store(tenant)》renewal work・redecoration work
recovery work(reform work)・original state recovery and restoration work, from partly repair work to full set of interior decorative construction,
we are receiving and executing your order.

 

Kindly give us your inquiry light heartedly in the first place.
We are waiting for your contact.

 

 

 

 

お問い合わせ

 

Instagram

Instagram

Twitter

Twitter

Facebook

Facebook

 

 

 

 

 

 

We are also sometimes updating SNS social media.

We are also waiting for your follow・it is good♡ by all means.

 

 

~~~~~~~~~~~~~~~~~~IKEBUKURO~~~~~~~~~~~~~~~~~~~

★If you look for an interior decorative construction contractor
at Ikebukuro, it is Kikuchi Souken Co., Ltd.★

★If you also look for original state recovery an restoration construction in Tokyo,
it is Kikuchi Souken Co.,Ltd.★

 

Address: 〒171-0014

4th floor, Musashiya No.3 Building,
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo

Phone: 03-5985-4252

~~~~~~~INTERIOR DECORATIVE CONSTRUCTION CONTRACTOR~~~~~~~

At this time, we thank you so much for browsing『Kikuchi Souken Co.,Ltd.』homepage.

Our company office is based at Ikebukuro, Toshima ward, Tokyo, and
we are an interior decorative construction contractor/company taking charge of full set of
『Interior decorative construction』・『Original state recovery and restoration construction』in all over Kanto district for you.

 

 

Today, we are explaining the difference between reform work and renovation work on the building repair and improvement.

You may think that these two work terms are similar. But, in fact, they are the work methods with two different kinds of approach.

We are explaining the respective features and the different points of usage.

 

 

What is reform work

 

Reform work is, a work method of executing interior decoration and facility repair and improvement without changing the existing building structure.

Specifically, re-sticking wall paper, changing floor material, renovation of the kitchen and bath room, and so on are included.

It is mainly executed at the residence and the commercial facility. The purpose is, tuning up become old or become unfunctional part to make into a new situation.

Reforming is a relatively small scaled work. The building basic structure is not changed.

 

 

 

 

 

 

 

What is renovation work?          

 

Renovation work is, a work method of recycling into a new valued building
by adding to change the building structure, design and layout.

 

While diverting an old building or a factory into a living house, or preserving a historical building,
it is used to repair and improve for matching the modern life style.

 

On renovation, we sometimes change the building layout and appearance drastically.
Therefore, while maintaining the building basic identity, we create a space which is suitable to new usage.

 

 

 

 

 

 

 

The point of proper use respectively

 

The purpose and range

・As reforming is done for repair, improving, and renewal at the existing part, it is a partial work.
It is mainly done at a living house and commercial facility.

・Renovation is done for a whole building repair and improvement, so it is often used
for recycling the historical building and factory.

 

 

Whether or not to change the structure

・Reform is mainly done for repair and improvement of interior decoration and facility,
so the building structure is not changed.

・Renovation is sometimes done to add for changing the building structure and layout.

 

 

Aiming value

・The main purpose of reform is enhancing functionality and beautiful appearance, so,
the basic identity does not change.

・Renovation is important to give birth to a new value.
So, while keeping the building characteristics, it creates more charming space.

 

 

 

 

 

Summary    

 

Both of reform work and renovation work are for building repair and improvement methods.

However, there are differences of the purpose, range,whether or not there is a structural change and so on.

 

Reform is mainly done for interior decoration and facility repair and improvement, so, partial repair and improvement are mainly done.

On the other hand, renovation is a whole building repair and improvement, so, it is recycling a new valued building.

Before the construction, it is important to select a suitable method to match the purpose and requiring content of change.

 

Building repair and improvement is a wonderful effort for giving birth to more comfortable and charming space.

Please try to consider to execute a work for matching the purpose by all means.

 

 

Finally,

 

The work costs are greatly different according to contractors.

Therefore, we recommend you to obtain【plural competitive quotations】.

 

In the first place, after comparing each quotation, please consider to give us your order.

 

From price quotation to construction work completion process,
our company directly manage and do all of construction work by ourselves.

So, we are supplying
「reasonable construction work result as much as possible with high quality and good things」
to our customers.

 

《Office・shop or store(tenant property)》renewal work・renovation decorative work(reform work)・
original state recovery and restoration construction・repair and improvement work(reform work)・
original state recovery and restoration work,
from partial repair and remedial work to full set of interior decorative work, we are glad to receive your order.

 

Please give us your relative inquiry light heartedly in the first place, as we are waiting for your contact whole heartedly.

 

 

 

お問い合わせ

 

Instagram

Instagram

Twitter

Twitter

Facebook

Facebook

 

 

 

 

 

 

We sometimes update SNS social media too.

We are waiting for your follow that it is good♡ too by all means.

 

 

~~~~~~~~~~~~~~~~~~IKEBUKURO~~~~~~~~~~~~~~~~~~~

★If you look for an interior decorative construction contractor
at Ikebukuro, it is Kikuchi Souken Co., Ltd.★

★If you also look for original state recovery an restoration construction in Tokyo,
it is Kikuchi Souken Co.,Ltd.★

 

Address: 〒171-0014

4th floor, Musashiya No.3 Building,
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo

Phone: 03-5985-4252

~~~~~~~INTERIOR DECORATIVE CONSTRUCTION CONTRACTOR~~~~~~~

由衷感谢各位观看『菊池综建株式会社』的网页

我们公司以东京都丰岛区池袋为办公据点,在关东全部地域范围内,正在从事整套
『室内装饰最后施工』・『修复原状施工』的『室内装饰行业者(室内装饰公司)』
为客户做工和服务。

 

 

 

此次,我们将要说明一下,

「关于建具框的安装工事」

 

首先,因为我们感觉到 很多本文章读者大概想「建具框」到底是什么?
所以,我们简单地说明一下了。

 

 

建具框是什么?

 

建具框是,在建筑物的壁面和地板地面设置,就是为了固定建具(门和窗户)的框架。

建具框有各种各样的种类,其形状和材料是按照建筑物的用途和设计被选择。

因为它在建筑物内和外设置,所以并不只是考虑外观美,而且也是考虑防盗性能和耐久性能。

 

 

安装建具框的场所

 

安装建具框的场所如下。

 

门框:为了安装门的框架,持有分割建具物内部和外部的作用。

窗户框:为了安装窗户的框架,常常考虑绝热性能和防盗性能来设计。

滑动门框:为了按装滑动门的框架,因为可以节省空间来开关,
在起居室和西洋式房屋等常常使用。

折叠门框:为了安装折叠门的框架,因为它可以节省空间来开关,
在壁橱和收纳空间等常常使用。

 

建具框是,在上记普遍的普通场所常常设置着。

 

 

 

建具框的主要素材

 

一般来说,建具框是从木材、金属等素材来做。

因为使用木材来做的建具框比较便宜,加工很容易,所以,在现场可以加工。

但是,它有弱于湿气和虫害的缺点。

 

另一方面,使用金属来做的建具比木材更有耐久性能。
遇到火灾时,有安全性能很高的优点。

铝和钢等金属素材是,又轻又有强度,容易保养维修,所以,
也适合于像高层建筑物和商业设施等的大规模建筑物使用它。

 

 

 

主要的建具框素材有以下种类

 

①钢制建具框:就是使用钢板的高强度框架,对防盗性能和耐久性能有优势。

②木制建具框:就是使用木材的建具框,木头的质感很美,把温暖感给予其空间。

③铝制建具框: 就是使用铝合金,又轻又结实的建具框,对耐久性能有优势,
保养维修也很容。

④PVC(聚氯乙烯)制建具框:就是使用(乙烯基)塑料树脂,又轻又结实的建具框,
对防腐性能・耐久性能有优势,保养维修也很容。

⑤复合材料建具框:就是使用复数材料来做的建具框,会发挥活用各个素材特征,
并有优质性能。

 

 

按照开关的方向,建具框有,往右开的用途和往左开的用途。
根据各个建筑物的布置,需要选择适当的开关方向。

 

建具框是,在施工现场跟建具一起设置。然后,它一般成为看不到的部分。
对建筑物的功能和设计来说,它起着重要的作用。

 

 

 

 

建具框的安装施工内容

 

建具框的安装施工是,在室内装饰施工现场的重要工程之一。
在这里,关于建具框的安装工事,按照顺序要来说明一下。

 

1.为了安装建具框,做个准备

确认建具框的尺寸和设置场所,做好安装时所需要的材料、工具、器具的准备。
加上,清洁清扫安装场所周围的壁面和地板地面,并确保安装建具框时所需要的空间。

 

2.决定设置建具框的位置。

为了正确设置建具框,使用水平仪和划基准线器等的测定器具。
决定它的设置位置后,做个为了安装建具框的框架。
做个此框架,可以正确地设置建具框。

 

3.做完建具框的框架后,安装建具框。

安装建具框之际,使用专用金具和小螺丝钉,确认水平、垂直、
平行等的平衡状态后,一边调整它,一边按装它。

 

4.安装框后,安装建具。

安装建具时,建具框和建具的尺寸必须合适。
并且,也得正确地安装建具的位置和方向。

 

以上是,安装建具框工事时一般的流程。

 

 

 

那么,我们在下面来介绍施工事例。

 

 

施工事例

 

这里是,在埼玉县大宫的租户(店铺)的新装饰施工。
正在安装建具框之际的施工照片。

 

塞进建具框,好好确认是否正确地塞进框的尺寸后,最后把门安装着。

 

 

 

 

 

总结

安装建具框的工事是,对建筑物的完成所需要的重要工程之一,需要正确的安装。
做个安装建具框工事的场合。我们推荐各位为了安全地做作业,依赖专门的行业者做工。

 

 

 

施工费用按照每家业界单位大大都不同。

因此,我们推荐各位把复数报价来【货比三家】。

首先,请比较一下各家的报价后,务必考虑给我们下订单。

 

从报价到施工完毕,我们公司全部都是亲自安排施工工事,
我们正在给客户供应「尽可能便宜的、质量高的好产品」。

 

 

关于《办公室・店铺(租户)》的修复原状工事・改装工事
修改工事(翻新工事)・修复原状工事
从一部分的修补工事到整套室内装饰施工,我们都在承做。

 

首先,请随意地给我们查询。我们衷心等待着

 

 

 

お問い合わせ

 

Instagram

Instagram

Twitter

Twitter/推特

Facebook

Facebook

 

 

 

 

 

 

我们也随时更新着SNS(社交网络服务)。

我们一定等待着各位的关注和跟随,即都真好啊♡。

 

 

 

~~~~~~~~~~~~~~~池袋~~~~~~~~~~~~~~~

池袋的室内装饰施工工事单位

修复原状施工工事整套室内装饰施工工事办公室的搬迁

 

菊池综建株式会社

地址:171-0014 东京都丰岛区池袋2-62-10 武藏屋第三楼四层

电话: 03-5985-4252

~~~~~~~~~~室内装饰施工工事单位~~~~~~~~~~~~